2-Series Integrated Dual Bus Control System
Crestron
AV2 & PRO2
Acceptable Commands
The 2-Series integrated dual bus control system is capable of interpreting commands
from various sources. Sources include serial communication (RS-232) with a PC via
the
COMPUTER
port. Over Ethernet (via the installed Z-BUS card) the control
system can receive commands by CTP (Crestron Terminal Protocol – reserved port
number) or Telnet. It is also possible to incorporate a symbol (Console) into the
loaded SIMPL Windows program that is capable of running console commands.
NOTE:
The Console logic symbol only appears in the System Control folder in the
Symbol Library
, after enabling a special symbol set to be displayed. To enable this
set, select
Edit | Preferences
, which opens the "SIMPL Windows Preferences"
window. In the
Symbol Set
area of the
General
tab, select
Special
as shown in the
illustration that follows this note.
"SIMPL Windows Preferences" Window
Commands can be categorized. It is possible to find the same command in more than
one category. Categories include:
•
Device – pertains to the unit itself.
•
Ethernet – govern parameters that involve the installed Z-BUS card.
•
File – influence the internal file system.
•
Main – includes common use commands.
•
System – sets system-wide parameters.
Commands are case insensitive and can be entered from the appropriate prompt (i.e.,
AV2, PRO2, etc.). Help on individual commands is available by typing the
command followed by a "?" (i.e., ADDMASTER ?). The table on the next page lists
acceptable commands alphabetically and provides a brief description. Additional
information about each command is available from "Appendix A: Command Details"
on page 47.
38
•
Integrated Dual Bus Control System: PRO2 & AV2
Operations Guide - DOC. 5957
Содержание 2 Series
Страница 1: ......
