Crestron 2 Series Скачать руководство пользователя | Manualshive

Страница: 21 / 64

background image

Crestron

AV2 & PRO2

2-Series Integrated Dual Bus Control System

Hookup Connections for the 2-Series Integrated Dual Bus Control System

TO CONTROLLABLE

DEVICES

FROM DEVICE

OUTPUTS

- CONTACT CLOSURES

- SOLID STATE CLOSURES

TO

IRP2

OR

SERIAL

DEVICES

TO

CONTROLLABLE

DEVICES

TO

OUTLET

(POWER

CORD

SUPPLIED)

TO SERIAL PORT

ON PC (ANOTHER

DB9 CONNECTOR

ON FRONT PANEL)

TO ANY

RS-232,

-422, OR

-485 DEVICE

TO ANY

CRESNET

OR STS

NETWORK

DEVICE

Programming the LCD Display (available on PRO2 only)

NOTE:

The following description assumes that the reader has some knowledge of

SIMPL™ Windows

®

. If not, please refer to the extensive help information provided

with the software.

SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use
programming language that is completely integrated and compatible with all
Crestron system hardware. The objects that are used in SIMPL are called symbols.
SIMPL Windows offers drag and drop functionality in a familiar Windows

®

environment.

SIMPL Windows is Crestron Electronics development environment for
programming Crestron control systems. It provides a well-designed graphical
environment with a number of workspaces (i.e., windows) in which a programmer
can select, configure, program, test, and monitor a Crestron control system.

The PRO2 LCD display is preprogrammed with a certain level of diagnostic, testing,
and network device information. Assuming the PRO2 is connected to a PC running
SIMPL Windows, a LCD display programming utility (Front Panel Editor) can be
accessed. This editor enables a programmer to program multi-level pages under the
PANEL (left-most, function) button on the LCD display.

Front Panel Editor

The LCD display on a PRO2 has different pages that are defined by the programmer.
Menu function buttons are assigned to different pages or objects. The LCD display
has a 2x40 character display with six-programmable buttons.

In Front Panel Editor, pages are designed and added to the panel. An example of the
default page is shown after this paragraph. Each front page is one display (2x40
characters) and can have as many objects as the physical size of the display allows
(objects can not overlap). The top line of the panel is used for informative object
displays, such as headings, indirect text, bar graphs, and time/date displays. The
bottom line of the panel is for objects that are accessed by the six menu function
buttons below the display. The buttons only access the page or object whose field is
directly over the button. Objects added to the bottom line of the display can have
page jumps or logic programming in SIMPL Windows that cause specific events to

Operations Guide - DOC. 5957

Integrated Dual Bus Control System: PRO2 & AV2

•

17

«
...
19
20
21
22
23
...
»

Содержание 2 Series

































































Отзывы:

Нет отзывов

Похожие инструкции для 2 Series

Бренд: ZIMO Страницы: 38

Бренд: Jetline Страницы: 58

Бренд: UNITED Страницы: 22

Бренд: Warren Controls Страницы: 28

Бренд: EAS Electric Страницы: 89

Gemini GEM-P9600

Бренд: NAPCO Страницы: 6

Gemini GEM-P816

Бренд: NAPCO Страницы: 56

Бренд: Sanhua Страницы: 3

Бренд: QED Страницы: 26

Бренд: NAiS Страницы: 144

Бренд: DSEGenset Страницы: 74

Бренд: ITALFARAD Страницы: 32

Бренд: TCS Страницы: 8

Бренд: MELICONI Страницы: 6

Бренд: Foxconn Страницы: 13

Бренд: Bartec Страницы: 52

Бренд: ZKTeco Страницы: 56

Бренд: Rain Bird Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды