ONE
K3
K4
K2
K1
L1
L2
K2
K1
19
Original instructions.
The machine is equipped a programmable interface that allows users to set or adjust the following features and parameters with
guidance from the digital display.
Use the following steps to adjust the boiler temperature:
Press the K3 for 5 seconds untill ’t1’ is shown on group display.
Within 5 seconds, press K2 or K3 to increase or decrease the programmed temperature.
When the desired temperature is adjusted, just wait 5s until the display shows ’t1’ again.
Then you can turn the machine off and on again, or wait 5s to come back to main screen.
Selection buttons K2 - K3
· User interface 1B
· Adjusting boiler temperature
USER PROGRAMMING 2B
USER PROGRAMMING 1B
The ONE 2B machines are equipped with a programmable ’Barista’ interface that allows users to set or adjust the following
features and parameters with guidance from the digital display:
Power off/on (without using the main switch).
GSP (Gradual Soft Preinfusion) settings. (Rotary Pump versions only).
Adjust the steam and group boiler temperatures.
ECO & Stand-by mode settings (set up energy saving mode timers).
Heating elements On/Off.
Clock and Date settings (adjust current time and date).
Shot screen time.
Counters (volume of water cycled, service intervals, and number of coffees dispensed, etc.).
Temperature units
Date format
USB interface (LFPP version only)
Barista knob resolution (LFPP version only)
· User Interface 2B
Selection buttons K1 - K2 - K3 - K4