Chapter 8 Enclosure
8.1 CREATOR Conference System Protocol Code Formats and Their
Descriptions
Communication protocol:9600.N.8.1
Control code:The codes below are Hex format codes.
Format:A0 [XX] 10 00 07 [YY] FF FF FF AF [ZZ]
Description:
◆
The [XX], [YY] and [ZZ] are 16 hexadecimal formats, where [YY] represents the ID mapping code;
◆
Algorithm: [ZZ]=FFFF- ([XX]+10+00+07+[YY]+FF+FF+FF), choose the last 16 HEX as the result;
◆
Adopt "128 bit" algorithm, whenever speech unit ID (number) increases 128, the ID mapping code
should increase 7F, ID mapping code [YY] high bit should increase 1, and [XX] increases 1.If the
speech unit ID (number) continues to increase, [YY] is to start increasing at 0, the value of [ZZ] is to
comply with the above algorithm, as follows shown in the table:
ID number of speech unit (10
hexadecimal format)
ID mapping code of return
code (16 hexadecimal format)
Serial return code (16 hexadecimal
format)
001
1
A0 10 10 00 07 01 FF FF FF AF DA
002
2
A0 10 10 00 07 02 FF FF FF AF D9
003
3
A0 10 10 00 07 03 FF FF FF AF D8
004
4
A0 10 10 00 07 04 FF FF FF AF D7
…
…
…
127
7F
A0 10 10 00 07 7F FF FF FF AF 5C
128
100
A0 11 10 00 07 00 FF FF FF AF DA
129
101
A0 11 10 00 07 01 FF FF FF AF D9
130
102
A0 11 10 00 07 02 FF FF FF AF D8
131
103
A0 11 10 00 07 03 FF FF FF AF D7
132
104
A0 11 10 00 07 04 FF FF FF AF D6
…
…
…
255
17F
A0 11 10 00 07 7F FF FF FF AF 5B
This table is the example list of the corresponding relationship between each coded speech unit
ID (number), serial code and the ID mapping code.
