CREATOR CHINA
2013-09
WWW.CREATOR1997.COM
17
WiFi Conference System U
ser„s Manual
Figure 4-7
Click the "Save" button to save the setting.
After open the AP 5GHz band, you should close
the AP 2.4GHz band, make AP worke alone in the
band of 5GHz, as follows:
Wireless band
:“2.4GHz”.
Wireless:
Select "off" to close the 2.4GHz
wireless band. So far 2.4GHz band has been
closed, the following options are unworkable, you
can keep the default values. Click the "Save"
button in the lower right corner to save.
4.4.2.2 Dynamic Pool Settings
In WIFI conference system, wireless AP access
device allocate IP to each unit by DHCP. With
"Advanced Settings" - > "DHCP Server" - >
"Dynamic Pool Setting" menu, enable the
CR-WF30 DHCP functions, settings as shown
below:
Figure 4-8
After the completion of setting, click the "Save"
button in the lower right corner to save.
IP
Assigned
Form
must
be
“192.168.2.*”,and "*" > 30 , Lease Time >
100000.
When multiple CR-WF30 wireless AP
access device are used in the system
simultaneously, the IP settings of DHCP
cannot overlap.
4.4.3 Administration Settings
This interface can be opened in Administration
Settings below the main menu Maintenance.
Administration is about management setting
options, it includes Limit Administrator, System
Name Settings, Login Settings, Console Settings,
SNMP Settings and Ping Control Setting. As
shown below:
Figure 4-9
Login Settings:
You can reset the user name and
password, CREATOR recommends that you use
the default username and password, which are
convenient for subsequent maintenance.
