CREATOR CHINA
2013-09
WWW.CREATOR1997.COM
19
WiFi Conference System U
ser„s Manual
Chapter 5 System Settings
5.1 System ID Settings
At the first time, the WIFI conferencing system ID
setting is needed before normal use. Systematic
ID setting can automatically allot IP, ID to each
unit, and finish the pairing operation of each unit
and RF wireless digital audio of AP. Specific steps
are as follows:
Step 1, wireless AP access settings
Before the system ID setting, you should set up a
wireless AP access device according to the
specific requirements. The setting of Wireless AP
access device should in line with the related
instructions.
SSID setting value of Wireless AP access
device should be within the range from
"CRWF301" to "CRWF30F".
When multiple APs connect through
network switches, the IP DHCP setting range
of each AP cannot overlap.
When multiple APs are used in the
system, in a radius of 30 meters work scope,
with the AUDIO ON/OFF switch
, only one AP’s
RF wireless digital audio be opened, the
others’ should be closed.
Step 2 System connecting
Connect the WIFI conference system with its
functional interfaces. And then power the system.
Step 3 Enter the setting state
1, long press the "ID" button on WIFI conference
controller front panel for 5 seconds, "ID" key
indicator stay bright, which suggests that has
entered the system ID setting state. At the same
time, the 2.4GHz indicator of wireless AP access
device flashes at 0.5 second intervals.
2, when WIFI conference controller enter into the
ID setting state, if the unit has connected to the
