Creative Sound Blaster Live!, Начало работы

Страница: 29 / 45

B-6 SB16 Emulation in MS-DOS/ Windows 95/98
To set
SBEMIXER
values in the command
line:
At the DOS prompt, type the
SBEMIXER
command in a single line. Its syntax is:
SBEMIXER
[/S:x] [/W:x] [/C:x] [/M:x] [/?]
where
•
Square brackets [ ] denote optional
parameters
This
Parameter
Specifies
/S:x Synth volume. x can be a
value from the range 0 to 127.
/W:x Wave volume. x can be a
value from the range 0 to 127.
/C:x CD audio volume. x can be a
value from the range 0 to 127.
/M:x Synth MT-32/LAPC-1 mode.
For x, 0 is Off, 1 is On.
/? View a short description of
the parameters.
An example of an
SBEMIXER
command is
SBEMIXER /S:64 /W:120 /C:50 /M:0
which corresponds to “set the synth volume to
64, the Wave volume to 120, the CD audio
volume to 50, and turn off the Synth
MT-32/LAPC-1 mode”.
To set
SBEMIXER
values within the Mixer
screen:
At the DOS prompt, type the
SBEMIXER
The interactive editor mode allows you to
change the mixer settings with the mouse,
<Tab>, <PgUp>, <PgDn>, or arrow keys.
Use the Save button to save the settings for the
next session.
SBEGO.EXE
Use this to confirm whether SB16 Emulation
is properly installed and working.