Product Guide 19
Troubleshooting
System Hangs,
Blank Screen or
Corrupted Display
After installing 3D Blaster RIVA TNT2 M64 and starting your system, the monitor
displays a blank screen.
Solutions
Try the following:
❑
Switch off your system and wait a while before switching it on again.
❑
Verify that any built-in VGA on your motherboard is disabled and that you
have removed any other video display card from your system.
❑
Ensure that your 3D Blaster RIVA TNT2 M64 card’s bus connector is fully
inserted into the expansion slot. Ensure this by pressing it gently and evenly
into the slot.
❑
Verify that the pins of your monitor’s VGA Input connector are not bent and
that the connector is properly connected to the VGA Out connector of
3D Blaster RIVA TNT2 M64.
Windows 98
Multi-Monitor
Display Problems
In a multi-monitor setting, the monitor connected to the 3D Blaster RIVA TNT2
M64 card remains blank even though the card and its drivers have been installed.
Cause
If 3D Blaster RIVA TNT2 M64’s drivers are not specified during the software
installation, the system installs it as a standard VGA card that does not support
Windows 98’s multi-monitor feature.
Содержание 3D Blaster GeForce 256 Annihilator
Страница 1: ...3D Blaster Riva TNT2 M64 Product Guide...