YORKTOWN
19794-300 Rev J (05-20)
© Copyright 2010, Creative Playthings
Page 11
ASSEMBLY INSTRUCTIONS
Step 5 — Platform Sides:
Fasten the right Platform Side (K) to the outside of the Porch
Corner Posts, in the position shown, using 5/16 x 4" Hex Bolt
Assemblies through the holes on each end.
Fasten the left Platform Side (K) to the gym Corner Posts
opposite the Right Platform Side using 5/16 x 4" Hex Bolt
Assemblies through the holes on each end. Position the Left
Platform Side as shown.
Step 6 — Center Platform Support:
Note the position the Center Platform Support (AA) at right.
With a 7/16" diameter drill, enlarge the holes indicated in the
appropriate Posts.
Fasten the Center Platform Support to the porch side of the
central Posts using two 3/8 x 6" Hex Bolt Assemblies. Make
sure that the holes in the Center Platform Support offset to
the bottom of the board.
K
AA
Q
R
K
Step 7 — Front & Back Platform
Supports:
Fasten the Platform Front (Q) to the
Posts at one end of the structure using
one 5/16 x 4" Hex Bolt Assembly in the
top holes (only) as shown at right.
Repeat with the Platform Back (R) on the
opposite Posts.
Enlarge holes to 7/16"
