Assembly
ManChester Fun DeCk
19807-100 rev D (07-16)
© Copyright 2011, Creative Playthings
Page 11
Assembly InstructIOns
steP 7 – ladder mounts:
Before installing the Ladder Mounts (o), insert eight 5/16
Weld nuts into the holes on the Ladder Mounts, Center Post
and gym Post in the positions shown at right. Make sure the
Weld nuts have clear threads and function properly; it will be
difficult to access them if there are problems in later steps.
Fasten the bottom of each Ladder Mount to the platform
Beam using one 5/16 x 5-1/2" hex Bolt assembly.
B
F
M
o
steP 6 – center Post:
Fasten the Center Post (B) to the top Post support using
one 5/16 x 4" hex Bolt assembly.
Fasten the bottom of the Center Post to the center of the
platform Beam using one 5/16 x 5-1/2" hex Bolt assembly.
steP 8 – Platform entry:
Fasten the Platform entry support (F) and Gym
end stringer (M) to the Ladder Mounts, Center
Post and gym Post using four 5/16 x 5-1/2" hex
Bolt assemblies as shown. Make sure the holes
in the Platform entry support are offset to the bot-
tom and the holes in the Gym end support offset
to the top.
When installed correctly, the Platform entry sup-
port and the Gym end stringer align at the bottom
edge.
