Assembly
ManChester Fun DeCk
19807-100 rev D (07-16)
© Copyright 2011, Creative Playthings
Page 17
Assembly InstructIOns
steP 23 – side Wall slats:
Fasten nine Wall slats (k) to the left side Wall support and
the Platform support using four #8 x 1-5/8" screws each.
evenly space the Wall slats between the posts. each gap
will be approximately 2-7/8".
repeat with nine more Wall slats on the right side Wall sup-
port and Platform support.
steP 24 – end Wall slats:
Fasten four Wall slats (k) to the end Wall support and Plat-
form end, spaced evenly between the Corner Posts, using
four #8 x 1-5/8" screws each. the gaps will be approximately
2-1/8"
steP 25 – climbing rocks:
Fasten one Climbing rock (s) to each of the three short
slats (Q) using two 1/4 x 1-1/2" hex Bolts, two 1/4" Lock
Washers, two 8MM Flat Washers and two 1/4" Weld nuts for
each rock.
caution: to prevent potentially serious injury
from head entrapment, gaps must be narrower
than 3-1/2" or wider than 9".
caution: to prevent potentially serious injury
from head entrapment, gaps must be narrower
than 3-1/2" or wider than 9".
Q
s
