LEXINGTON WITH WOOD ROOF
19686-300 Rev Q (09-20)
© Copyright 2005, Creative Playthings
Assembly
Page 7
COMPONENT PARTS
63007-445 Lexington Wood Roof Box
X 5 Ea 31818-102 Ceiling Joist 2 x 3 x 15"
Y 2 Ea 32390-102 Roof Support 2 x 4 x 83-1/4"
Z
2 Ea 32391-102 Roof Block 4 x 4 x 5"
AA 2 Ea 40528-102 Roof Panel
AB* 1 Ea 50347-701 Hardware Bag - Lexington Wood Roof
AC 2 Ea 32419-102 End Wall Support - 2 x 6 x 59-1/4"
AD 1 Ea 32847-402 Ridge Cap Part A - 5/4 x 3-5/32 x 82-1/4"
AE 1 Ea 32848-402 Ridge Cap Part B - 5/4 x 2-9/32 x 82-1/4"
63007-423 Lexington Gym Box 3
T
2 Ea 32403-102 Entrance Wall Slat - 5/4 x 6 x 31-1/2"
U 20 Ea 32404-102 Wall Slat - 5/4 x 6 x 31-1/2"
V 2 Ea 32415-102 Platform End - 2 x 6 x 59-1/4"
W 2 Ea 32416-102 Sandbox End - 2 x 6 x 59-1/4"
63007-421 Lexington Gym Box 1
A
1 Ea 31465-102 Safety Rail - 2 x 4 x 83-1/4"
B 8 Ea 31682-102 Angle Brace - 2 x 4 x 17-1/4"
F
4 Ea 32405-102 Corner Post - 4 x 4 x 116"
G* 3 Ea 32406-102 Inside Stringer - 2 x 3 x 56-1/2"
H* 2 Ea 32407-102 Outside Stringer - 2 x 3 x 56-1/2"
I
2 Ea 32408-102 Narrow Platform Board - 5/4 x 4 x 76-3/4"
J
2 Ea 14179-400 Deluxe Hand Grip, Green
K* 1 Ea 15133-400 Slide Mount - Green
L* 1 Ea 50334-700 Hardware Bag - SP (2005)
M* 1 Ea 50345-200 Hole Cap Pack
Component Part Identification:
Take inventory of all parts, making sure nothing is missing or
defective.
If you find that parts are missing or defective call the Creative
Playthings Customer Service Department at 1-800-598-4997
* Not visible in illustration 9 on Page 6
BOX 1
BOX 3
BOX 2
ACCESS LADDER
63007-422 Lexington Gym Box 2
N 9 Ea 32409-102 Platform Board - 5/4 x 6 x 83-1/4"
O 2 Ea 32411-102 Platform Side - 2 x 6 x 83-1/4"
P 2 Ea 32413-102 Side Wall Support - 2 x 6 x 83-1/4"
Q 2 Ea 32414-102 Sandbox Side - 2 x 6 x 83-1/4"
Access Ladder Box - SH946-102
BB 1 ea 40422-102 Access Ladder Assembly
ROOF BOX
Replacement Roof
Board: 32806-402
D
1
31820-102 Swing Mount - 4 x 4 x 39"
U 3 Ea 32404-102 Wall Slat - 5/4 x 6 x 31-1/2"
This gym comes standard with no Swing Mounts. One Swing Mount is
needed to attach a 7 Ft Beam to the gym. If you have a Swing Frame and
the Swing Mounts have not been included, contact customer service.
If your gym is configured with no accessories that require a wall opening
for access, three additional Wall Slats are provided. If additional Slats are
not included, contact customer service.
