LEXINGTON WITH WOOD ROOF
19686-300 Rev Q (09-20)
© Copyright 2005, Creative Playthings
Assembly
Page 17
ASSEMBLY INSTRUCTIONS
STEP 24 — Rear Wall Slats:
Fasten six Wall Slats (U) to the rear platform end and the rear
end wall support, as shown. Use four #10 x 1-5/8" screws
in each wall slat. Leave approximately 2-5/8" between each
wall slat.
Parts have been omitted for clarity.
STEP 25 — Left Wall Slats:
Fasten nine Wall Slats (U) to the left platform side and the left
wall support, as shown. Use four #10 x 1-5/8" screws in each
wall slat. Leave approximately 3" between each wall slat.
Parts have been omitted for clarity.
STEP 26 — Right/Entrance Wall Slats:
Find two Entrance Wall Slats (T) and five Wall Slats (U).
Place one entrance slat 3-3/8" from the front right corner
post. Fasten the entrance slat to the inside of the right
platform side and right side wall support using four #10 x
1-5/8" screws. Fasten the other entrance slat 17" from the
first entrance slat using four #10 x 1-5/8" screws.
Evenly space five wall slats (U) between the entrance slat and
the right rear corner post, as shown. Leave approximately
3-3/8" between each wall slat. Fasten each wall slat using
four #10 x 1-5/8" screws.
U
U
T
17"
U
#10 x 1-5/8"
Screws
1/2" gap
1/2" gap
#10 x 1-5/8"
Screws
#10 x 1-5/8"
Screws
