Stagehand Mini
2
Manual
Page 28
Troubleshooting
If you’ve reached this section of the manual, things aren’t going well. Take a look at some of the common
problems and solutions. If none of those help get you up and running, please get in touch with us. Our various
methods of communication can be found in the Technical Support section.
Common
Problems
Problem
Solution
When running forward, the encoder position
decreases. When running reverse, the encoder
position increases
The encoder and motor have electrically inverse
polarity. You need to either change the motor
wiring or the encoder wiring.
Re‐wire the motor to match the encoder polarity:
Swap two power legs on the motor by
swapping the wires on Pin 1 and Pin 2
inside the motor plug.
– OR –
Re‐wire the encoder to match the motor polarity:
Swap signal A with signal B
Swap signal /A with signal /B
You may need to rewire both the Position and
Speed encoder signals.
– OR –
Re‐wire the speed output signal to reverse the
drive direction:
Swap pins 1 & 4 on the control cable
The OLED status display is dark, but the main
power indicator is on.
The motion controller may be disconnected
internally, to fix it:
Unplug the power cord from the
Stagehand. Remove the motion controller
by loosening the four (4) #10 socket head
Содержание Stagehand Mini2
