CreatComm TB8H Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 36

CreatComm TB8H Скачать руководство пользователя страница 4

C O PYRIG H T ©2016 C reatC omm Technology

U ser Manual

TB8H

Page 4



V e rs io n s

Table 1-1 Version

Version

Date

H istory

Author

1.0.2450

2016-5-5

C reated

Terry

1.0.2452

2016-5-23

C hange some pictures to new

version;
Modified some errors;

S haron

1.1.2452

2016-7-12

U pdate the template

S haron

FC C N otice

This device compiles with Part 15 of the FC C Rules. O peration is subject to the following
two conditions (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.

This equipment has been tested and found to comply with the limits for a C lass B digital
device, pursuant to part 15 of the FC C Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. H owever, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, you
are encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

C onnect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•

C onsult the dealer or an experienced radio/TV technician for help.

«
...
2
3
4
5
6
...
»

Содержание TB8H





































Отзывы:

Нет отзывов