U ser Manual
TB8H
Page 29
C O PYRIG H T ©2016 C reatC omm Technology
Figure 7-3 VLAN S ettings – ath8
Bridge function is needed to use together with VLAN . As show below, we add VLAN 10
on port eth0 and ath8, they are eth0.10 and ath8.10, and put them into the same bridge.
The packets from eth0.10 or ath8.10 will be added a VLAN label which ID is 10. That
requires: the opposite wireless connection side must support VLAN 10, the device which
connects with eth0 is also need to support VLAN 10.
Figure 7-4 VLAN S ettings – eth0
8
Advanced
The Advanced page is shown in Figure.
Figure 8-1 Advanced
Auto AC K-Timeout Adjust
：
It is suggested to enable this function, so that the distance
between 2 TB8H devices can be detected and all the related parameters can be
optimized to achieve the best link quality.
Distance: The distance can be set manually if the Auto AC K-Timeout Adjust is disabled,
otherwise, the distance parameter is not allowed to be set. It is suggested the distance is
set automatically by enabling Auto AC K-Timeout Adjust parameter.
