C opyright © 2016 C reatC omm Technology. All rights reserved. C reatC omm, the C reatC omm logo, are trademarks of C reatC omm. All other
company and product names may be trademarks of their respective companies. W hile every effort is made to ensure the information given
is accurate, C reatC omm does not accept liability for any errors or mistakes which may arise. S pecifications and other information in this
document may be subject to change without notice. To learn more about C reatC omm products, visit www.creatcomm.com.
U ser Manual
TB8H
Page 36
2.
The S tation device and AP device is not aligned very well, including both horizontally
and vertically, since the antenna of the TB8H is directional.
3.
The S tation device is installed in the windows, and the windows glass shields the
wireless signal.
4.
The distance between the AP and S tation devices is too far.
5.
The signal strength is high, but the throughput is low
1.
There are two much interferences, or multi-path interferences. For example, there are
two much 2.4G H z or 5.8G H z W IFI device working nearby.
2.
The RJ45 ports of the TB8H device don’t work well.
6.
During the point-to-point or point-to-multi-point connection, when ping
from one device to another, the latency is too long or the packet is lost.
1.
Isolate the several APs if they are connected to one PO E switch.
2.
The RJ45 ports are not connected very well.
7.
The internet access is lost and the internet speed is low.
1.
There are too much stations connected to one AP.
2.
AP signal is too week.
3.
There are interference source nearby.
4.
C heck the number of users and the max internet speed provided by the IS P.
O rdering Information
C reatcomm Technologies C o., Ltd.
S uite619, Build A, Modern Plaza, N o.18 W eiye Road K unshan Development Zone,
Jiangsu, C hina. 215300
Tel: +86-512-86186383
Email: [email protected]
W ebsite: www.creatcomm.com