background image

Warranty:

Cre8audio warrants to the original purchaser that this unit is free of defects in materials

and workmanship under normal use and maintenance for a period of one (1) year from

the date of original purchase. The warranty applies only to registered Cre8audio users that

register their Cre8audio Product(s) within fourteen (14) days of time of original purchase. To

register Cre8audio Products, visit Cre8audio.com. If the unit fails within the one (1) year

period, it will be repaired, or replaced, at Cre8audio’s option, at no charge, when

returned prepaid to the Cre8audio Technical Service Center with proof of purchase – the

sales receipt may be used for this purpose. Installation labor is not covered under this

warranty.

Cre8audio reserves the right to change the method by which Cre8audio may provide

warranty service, and any Cre8audio Product’s eligibility to receive a particular method of

service. Service will be limited to the options available in the country where service is

requested. Service options, parts availability and response times may vary according to

country. The original purchaser will be responsible for all shipping and handling charges.

Customers that seek service in a country that is not the country of purchase must comply

with all applicable import and export laws and regulations and be responsible for all

custom duties, V.A.T. and other associated taxes and charges. For international service,

Cre8audio may repair or replace Cre8audio Products and parts with comparable

Cre8audio Products and parts that comply with local standards.

All replacement parts, whether new or re-manufactured, assume as their warranty period

for only the remaining time of this warranty. This warranty does not apply to damage

caused by improper use, accident, abuse, improper voltage service, fire, flood, lightning,

or other acts of God, or if the product was altered or repaired by anyone other than

Cre8audio Technical Service Center. Consequential and incidental damages are not

recoverable under this warranty.

Some regions do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply. This warranty gives you

specific legal rights, and you may also have other rights, which vary by state and country

No portion of this warranty may be copied or duplicated without the expressed written

permission of Cre8audio. THIS WARRANTY IS NOT TRANSFERABLE.

Service and Contact Information:

Please contact us for service or other information related to the Function Junction or any

other Cre8audio product. https://www.cre8audio.com/supportticket

More Information

Содержание Function Junction













Отзывы: