Crane STEP1042L Скачать руководство пользователя | Manualshive

Страница: 14 / 26

background image

Fig. 8

POWER CABLE (29a) or

(OPTIONAL POWER &

CONTROL CABLE for 1

PHASE)

GLAND NUT (29b)

FRICTION RING (29c)

GROMMET (29d)

FRICTION RING (29c)

EPOXY SEALER

GLAND NUT (32b)

(OPTIONAL 3PHASE

CONTROL CABLE) (32)

FRICTION RING (32c)

GROMMET (32d)

FRICTION RING (32c)

SECTION: G REPLACEMENT PARTS

G-1 ORDERING REPLACEMENT PARTS:

When ordering replacement parts,

ALWAYS

furnish the

following information:

1. Pump serial number and date code. (Paragraph G-4)
2. Pump model number. (Paragraph G-3)
3. Pump part number. (Paragraph G-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.

G-2 PART NUMBER:

The part number consists of a six (6) digit number, which
appears in the catalog. A one or two letter suffix may follow
this number to designate the design configuration. This
number is used for ordering and obtaining information.

G-3 MODEL NUMBER:

This designation consists of numbers and letters which
represent the discharge size, series, horsepower, motor
phase and voltage, speed and pump design. This number
is used for ordering and obtaining information.

G-4 SERIAL NUMBER:

The serial number block will consist of a six digit number,
which is specific to each pump and may be preceded by a
alpha character, which indicates the plant location. This
number will also be suffixed with a four digit number, which
indicates the date the unit was built (Date Code).

EXAMPLE:

A012345 0490.

Reference the six digit portion (Serial Number) of this
number when referring to the product.

F-4.4) Cable Assemblies:
Power Cable-

Refill with cooling oil (if it has been drained)

as outlined in paragraph F-1.3. Make wire connections as
outlined in paragraph F-4.3. Insert one friction ring (29c),
grommet (29d), another fiction ring (29c) and gland nut
(29b) into motor housing (5) and tighten gland nut (29b) to
15 ft. lbs. to prevent water leakage (see Fig. 8).

Control Cable-

to reassemble, insert one friction ring (32c),

grommet (32d), one friction ring (32c) and gland nut (32b)
into motor housing (5). Torque gland nuts (32b) to 15 ft. lbs.
to prevent water leakage.

1

2

3

Typical Name Plate.

14

«
...
12
13
14
15
16
...
»

Содержание STEP1042L



























Отзывы:

Нет отзывов

Похожие инструкции для STEP1042L

Бренд: Watts Страницы: 37

Бренд: NCP Страницы: 16

Alwayzaire P3062

Бренд: Bestway Страницы: 2

HOF14AFRQ 1F Series

Бренд: Halsey Taylor Страницы: 4

Бренд: Western Shelter Systems Страницы: 2

Бренд: Winston Страницы: 28

Бренд: K2 Pumps Страницы: 24

Бренд: Sulzer Страницы: 42

Бренд: habitat et jardin Страницы: 19

Бренд: Malibu Boats Страницы: 2

AirSite GreenMaster-HP 3-12/12

Бренд: Nibe Страницы: 104

Бренд: Macon Страницы: 24

Бренд: Warren rupp Страницы: 16

Бренд: Aquacal Страницы: 108

INTERGAS Altherma EJHA-AV3

Бренд: Daikin Страницы: 36

AHLSTAR 2.15 Series

Бренд: Sulzer Страницы: 122

Aquamax ECO 4000

Бренд: Oase Страницы: 43

Бренд: Wahl Bach Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды