CRAM-A-LOT SCR-02, Инструкция оператора

Страница: 23 / 38

23
Authorized Technician Maintenance, cont.
Checking and adding oil.
Time: 30 minutes
Tools: Clean funnel
Parts: SAE 5W-20 high grade hydraulic oil (Sun 2105 or equivalent)
Supplies: Disposable shop towels.
Tips: Make sure the ram is fully retracted when checking and filling with oil.
Be patient when filling with oil.
The cleanliness of the oil is very important to the long term reliability of the hydraulic system.
Checking the oil level.
1. Run the machine to place the ram in the fully retracted position.
2. Check the oil by looking at the sight gauge on the side of the oil tank. If the oil level is below the black fill line on the
gauge, oil needs to be added to the tank.
Adding oil.
1. IMPORTANT! - Follow all lockout/tag-out procedures before continuing this service procedure.
2. Using a disposable shop towel, clean any dust and debris from around the oil fill port to prevent contaminates from
entering the hydraulic system.
3. Remove oil fill cap.
4. Using clean funnel, pour oil into the port until oil lever has reached the black fill line on the oil sight gauge.
5. When the oil level reaches the black fill line, remove the funnel, replace the oil fill cap.
6. Clean any spilled oil off the machine with a disposable shop towel.
7. Remove the lockout/tag-out according to procedures and restore power to unit.
8. Check unit operation.
Pressure Setting Procedure.