Craftsman CMEPW2400, Инструкция по эксплуатации

Страница: 8 / 36

English
6
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Fig. I
14
2
Proper Hand Position (Fig. J)
WARNING:
To reduce the risk of serious personal
injury, ALWAYS use proper hand position as shown.
WARNING:
To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the spray handle
grip
4 and the other hand on the spray handle 3 .
Test Ground-Fault Circuit-Interrupter
(GFCI) Before Each Use (FIg. A)
This pressure washer is provided with a ground-fault circuit-
interrupter (GFCI) built into the plug of the power-supply
cord. This device provides additional protection from the
risk of electric shock.
1. Plug the Ground Fault Circuit Interrupter (GFCI) 13 into
a working grounded outlet.
2. The indicator at the top of the GFCI should turn green
when product is ready to use.
3. Press the “TEST” button (bottom). The green indicator
should disappear.
4. Press “RESET” button for use. Do not use if the above
test fails.
Fig. J
3 4
Pressure Washing
Preparing Surface for Cleaning
• Remove objects from the area which could create a
hazard such as children's toys or outdoor furniture.
• Ensure that all doors and windows are closed tight. Protect
all plants and trees in the adjacent area with a drop cloth
ensuring that they will not be harmed by any overspray.
• Pre-rinse cleaning area with fresh water.
• Use only detergents formulated for pressure washers.
• Always test detergent in an inconspicuous area before use.
Preparing Pressure Washer Unit for Use
(Fig. A, K)
DANGER:
Risk of fluid injection and laceration.
When using the high-pressure setting, DO NOT allow
the high-pressure spray to come in contact with
unprotected skin, eyes, or with any pets or animals.
Serious injury will occur.
CAUTION: Before operation:
- Connect the water supply to the pressure washer . For
instructions on connecting the water supply to the
pressure washer, please refer to
Attaching garden
hose under Assembly and Adjustments .
- Connect the high pressure hose to t he pressure
washer and the pressure wand. For instructions
on connecting the high pressure hose to the
pressure washer and pressure wand, please refer to
Attaching high Pressure hose under Assembly
and Adjustments
.
Fig. K
4
6
5
Preparing Spray Handle
iMPORTAnT:
Before turning on the pressure washer unit,
disengage the trigger lock-off 5 and squeeze the trigger 6 .
Hold the trigger for 30 seconds to purge the system of air. If
air is still found in the water stream, continue to run water
through the spray handle.
1. Disengage the trigger lock-off 5 .
2. Squeeze the trigger
6
.
Cleaning a Surface (Fig. A, L)
• To start the pressure washer, rotate the ON/OFF switch
8 to the ON position..
• The best angle for spraying water against a cleaning
surface is 45°. Spraying head on tends to cause dirt
particles to embed in the surface. When working on