Craftsman CM4.33 Скачать руководство пользователя

Страница: 9 / 48

Title part xxx

Subtitle part xxx

craftsman marine diesel engines CM4.33 / cm4.42

Safety 7

Explanation of symbols

Explanation of symbols

This page will provide you with a survey of all warning pictograms, used throughout

this manual.

Notes referring to safety issues show this symbol:

•

DANGER

•

ATTENTION

Please adhere strictly to the recommendations in this chapter and instruct anybody

else, who may be operating or servicing the engine, to do likewise. hese are the

safety recommendations:

• Never touch any moving parts when the engine is running.

• When in operation the engine (or certain parts thereof) may become very hot. Do

not ever touch these parts and be very careful with flammable products in the

neighbourhood of the engine.

• When checking upon or adjusting any parts, or when checking or filling lubricants

or cooling liquids, make sure that the engine is stopped.

• Do not open the filler cap on the expansion tank or on the heat exchanger unless

the engine is completely cooled down.

• Maintenance and service to the engine must only be provided by experienced

people, using suitable tools. If possible entrust only an authorized Craftsman

Marine dealer to do such work

Symbols

Pay attention to

the symbols and read the instructions in the

text

Attention

(especially with a view to a safety risk for man or material)

Содержание CM4.33

















































Результаты поиска

Содержание CM4.33

Отзывы:

Похожие инструкции для CM4.33

Бренды по названию

Популярные бренды

Craftsman CM4.33, Руководство пользователя

Результаты поиска

Содержание CM4.33

Отзывы:

Похожие инструкции для CM4.33

Бренды по названию

Популярные бренды