Craftsman 917.27636 Скачать руководство пользователя | Manualshive

Страница: 30 / 34

background image

30

PROBLEM CAUSE CORRECTION

Will not start

1. Out of fuel. 1. Fill fuel tank.

2.   Engine not “CHOKED”    2.   See “TO START ENGINE”
   properly.     in Operation section.
3.   Engine fl ooded.   3.   Wait several minutes before
   attempting to start.
4.   Bad spark plug. 4.   Replace spark plug.
5.   Dirty air fi lter. 5.   Clean/replace air fi lter.
6.   Dirty fuel fi lter.   6.   Replace fuel fi lter.
7.   Water in fuel. 7.   Empty fuel tank and carbure-
   tor, refi ll tank with fresh
   gasoline and replace fuel
   fi lter.
8.   Loose or damaged wiring. 8.   Check all wiring.
9.   Carburetor out of     9.   See “To Adjust Carburetor”
   adjustment.      in Service and Adjustments
   section.
10. Engine valves out of   10. Contact a Sears or other
   adjustment.      qualifi ed service center.

11. Extreme Cold Conditions

11. See “To start engine” in

operation section.

Hard to start

1. Dirty air fi lter. 1. Clean/replace air fi lter.

2.   Bad spark plug. 2.   Replace spark plug.
3.   Weak or dead battery. 3.   Recharge or replace battery.
4.   Dirty fuel fi lter.   4.   Replace fuel fi lter.
5.   Stale or dirty fuel.   5.   Empty fuel tank and refi ll tank
  with fresh, clean gasoline.
6.   Loose or damaged wiring. 6.   Check all wiring.
7.   Carburetor out of     7.   See “To Adjust Car bu re tor”
   adjustment.      in Service and Ad just ments
   section.
8.   Engine valves out of   8.   Contact a Sears or other
   adjustment.      qualifi ed service center.

Engine will not

1. Brake pedal not 1. Depress brake pedal.

turn over

depressed

2.   At tach ment clutch is   2.   Disengage attachment
   engaged.    clutch.
3.   Weak or dead battery. 3.   Recharge or replace battery.
4.   Blown fuse.   4.   Replace fuse.
5.   Corroded battery terminals.     5.   Clean battery terminals.
6.   Loose or damaged wiring. 6.   Check all wiring.
7.   Faulty ignition switch.     7.   Check/replace ignition

switch.

8.   Faulty solenoid or starter.   8.   Check/replace solenoid or
   starter.
9.   Faulty operator presence    9.   Contact a Sears or other
   switch(es).    qualifi ed service center.

Engine clicks but

1. Weak or dead battery. 1. Re charge or replace battery.

will not start

2. Corroded battery terminals. 2. Clean battery terminals.

3.   Loose or damaged wiring. 3.   Check all wiring.
4.   Faulty solenoid or starter.   4.   Check/replace solenoid or
   starter.

TROUBLESHOOTING CHART:
See ap pro pri ate section in manual un less di rect ed to Sears service center

«
...
28
29
30
31
32
...
»

Содержание 917.27636



































Отзывы:

Нет отзывов

Похожие инструкции для 917.27636

Бренд: Land Pride Страницы: 60

Бренд: Yard-Man Страницы: 24

Бренд: Cub Cadet Страницы: 19

Бренд: Bad Boy Страницы: 48

Бренд: Yazoo/Kees Страницы: 19

Бренд: Poulan Pro Страницы: 42

Бренд: Ariens Страницы: 26

Бренд: Yard-Man Страницы: 6

Бренд: LawnMaster Страницы: 81

Бренд: Toro Страницы: 48

Бренд: Cub Cadet Страницы: 48

Бренд: Exmark Страницы: 44

Бренд: Strend Pro Страницы: 54

Бренд: Kärcher Страницы: 21

PowerMax 1200/32

Бренд: Gardena Страницы: 15

Бренд: sunjoe Страницы: 64

Бренд: Snapper Страницы: 12

Бренд: Snapper Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды