Safety Instructions
Areas of responsibility
Responsibilities of the person in
charge of the instrument:
Electromagnetic Compatibility
(EMC)
WARNING
Laser classification
The device produces visible laser
beams, which are emitted from the
instrument: It is a Class 2 laser product
in accordance with:
Do not stare into the laser beam or direct
it towards other people unnecessarily.
Eye protection is normally afforded by
aversion responses including the blink
reflex.
Laser Class 2 products:
IEC60825-1 : 2014“Radiation safety
of laser products”
WARNING
Looking directly into the beam with
optical aids (e.g. binoculars, telescopes)
can be hazardous.
CAUTION
Looking into the laser beam may be
hazardous to the eyes.
Wavelength
620 - 690 nm
Maximum radiant output power
for classification
< 1 mW
•
To understand the safety instructions
on the product and the instructions in
the User Manual.
•
To be familiar with local safety
regula-tions relating to accident
prevention.
•
Always prevent access to the product
by unauthorised personnel.
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for help.
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation.This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
The device conforms to the most stringent
requirements of the relevant standards
and regulations. However, the possibility
of causing interference in other devices
cannot be totally excluded.
FCC statement (applicable in U.S.)
6 LASER DISTANCE MEASURE 09-25466
