background image

Troubleshooting

General

1.7 - 50 ft

***

0.5 - 15 m

± 1/8 in

***

± 3 mm

1/16 in
1 mm

2

620-690 nm, < 1 mW

Power OFF automatically

Continuous measuring

Dimension (H x D x W)

after 120 s

yes

up to 3h

2 x 1.5V (AAA)

14 to 140 °F
-10 to 60 °C
32 to 104 °F
0 to 40 °C

5.9 x 0.79 x 0.79 IN
150 x 20 x 20 mm

62 g / 2.19 oz

Battery service life in
measuring operation, approx.

Batteries

•    Clean the device with a damp, 
     soft cloth.
•    Never immerse the device in water.
•    Never use aggressive cleaning
     agents or solvents.

Disposal

CAUTION

* Favorable conditions are: white and diffuse reflecting 
target (white painted wall), low background illumination and 
moderate temperatures.
** Tolerances apply with a confidence level of 95%.

Potential issue table 

ISSUE CAUSE  ACTION

Hardware protection

after shocking

Take out batteries

and insert again

Low battery

Replace with

new batteries

Failure to

switch on 

All dashes shows

on display

Insufficient

On/Measure/Units

button press

Press the 

On/Measure/Units

button firmly 

Received signal

too weak/

Measuring time too long

Change target surface

(e.g. white paper)  

Received signal

too strong

(target is too reflective)  

Change target surface 

Surrending light

is too strong

Shadow the 

target area 

(e.g. white paper) 

The object is out

of rated range

Measure within

rated range

Beam is moved too fast

Move the measuring

tool slowly

Range with favorable
conditions *

Accuracy with
favourable conditions *

Care

Smallest unit displayed

Laser class

Laser type

Weight
(without batteries)

Temperature range:

- Storage

- Operation

Technical Data

Batteries must not be disposed of with 
household waste. Care for the 
environment and take them to the 
collection points provided in accordance 
with national or local regulations.The 
product must not be disposed with 
household waste. Dispose of the
product appropriately in
accordance with the national
regulations in force in your country. 
Adhere to the national and country 
specific regulations.

4                                                                                                  LASER DISTANCE MEASURE       09-25466

CRAFTSMAN LIMITED WARRANTY

FOR ONE YEAR

 from the date of sale this 

product is warranted against defects in 
material or workmanship.
WITH PROOF OF SALE return a defective 
product to the retailer from which it was 
purchased for free replacement. 

This warranty does not cover the batteries, 
which are expendable parts that can wear out 
from normal use within the warranty period.

This warranty applies for only 90 days from 
the date of sale if this product is ever used 
while providing commercial services or if 
rented to another person.

Transform SR Brands Management LLC
Hoffman Estates, IL 60179

Содержание 25466















Отзывы: