page 7
7. Canopy Assembly.
*Remember that antenna for remote control
receiver must rest
outside
of hanging bracket.
Raise canopy to hanging bracket and align
slotted holes in canopy with loosened screws in
hanging bracket. Twist canopy to lock. Re-insert
screws previously removed (on page 3, Section 4)
and secure all screws with a Phillips screwdriver.
antenna
canopy
hanging bracket
8. Blade Assembly.
WARNING
: To reduce the risk of serious bodily
injury,
DO NOT use power tools to assemble the
blades. If overtightened, blades may crack and
break.
Time Saver
: Washers for blade screws can be set
on each blade screw prior to installing the blades.
Locate 6 blade attachment screws and washers
in one of the hardware packs. Place a blade over
one of the openings on the top of motor
housing. Align holes in blade with 3 holes located
on motor housing. Place blade plate over blade,
aligning holes in blade plate with holes in blade.
Insert 3 blade attachment screws (along with
washers) and tighten screws securely with a
Phillips screwdriver. Repeat procedure for the
other blade.
blade plate
blade screws
washers
blade
