motor housing
glass shade
notch
groove
JD E11 bulb
page 8
9. Light Assembly (Optional).
If you wish to use your fan WITH light
, install the
halogen bulb, type JD E11, 50 watts max.,
provided.
Tip
:
Do not touch glass portion of bulb with fingers
or hands. Oil from skin can cause bulb to overheat
and go out prematurely. Use cardboard box or
foam wrapping bulb was packed with to layer
around glass portion of bulb.
Align grooves on glass shade with notches on
light kit fitter. Turn glass shade to the RIGHT to
attach glass shade.
NOTE
: Pull down very
gently
on glass shade to
make sure that glass shade is secured completely.
IMPORTANT
: When you need to replace the
bulb, please allow bulb and glass shade to cool
down before touching. Use a halogen bulb, type
JD E11, 50 watts max., remembering not to touch
the glass portion of the bulb as described above
(see "
Tip
").
If you wish to use your fan WITHOUT light
, align
grooves on cover plate with notches on light kit
fitter. Turn cover plate to the RIGHT to attach the
cover plate.
NOTE:
Pull down very gently on cover plate to
make sure that cover plate is secured completely.
light kit fitter
cover plate
groove
notch
light kit fitter
