page 10
11. Testing Your Fan.
I
II
IV
VI
III
V
It is recommended that you test fan before
finalizing installation. Locate
ON
/
OFF
slider switch
on wall control and set to the
ON
position. Test
light and dimmer function and then test fan
speeds. Next, locate remote control transmitter.
Test fan speeds with the different fan speed
buttons on remote control. Test the light ON/OFF
function with the button on the remote control.
Test dimmer function by holding the button. If
the remote control operates all of the functions of
the fan and light, battery has been installed
correctly. If fan and/or light do (does) not function,
please refer to "Troubleshooting" section to solve
any issues.
Fan
must
be on LOW
before
setting the fan to
reverse direction. Use button (located on the
front of the remote control or on the front of the
wall control) to recirculate air depending on the
season. A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
IMPORTANT:
Remote and wall controls must be
synchronized with fan in order to properly
function.
-
I
OFF
II
III
IV
V
VI
ON
wall control
remote control
transmitter
VI
I
