page 9
11. Light Kit Assembly.
Remove 1 screw from motor plate on
underside of motor housing and partially
loosen the other 2 screws.
Connect
BLACK
(or
BLUE
) wire from motor
housing to
BLACK
wire from the light kit
fitter and
WHITE
wire from motor housing
to
WHITE
wire from light kit fitter. Make
sure molex connections snap together
completely.
Align slotted holes in light kit fitter with
loosened screws in motor plate. Twist light
kit fitter to lock. Re-insert screw that was
previously removed and securely tighten all
3 screws with a Phillips screwdriver.
Install the 75-watt compact fluorescent
bulb, type GU24, included.
Locate slots on glass shade and align with
nodules on inside of light kit fitter.
Gently
push up on glass shade and turn
to the
RIGHT (clockwise)
until it slides completely
into place.
IMPORTANT
:
When replacing the bulb,
please allow bulb and glass shade to cool
down before touching.
Hg
LAMP CONTAINS MERCURY
Manage in accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow clean-up
procedures provided by contacts below.
www.epa.gov/cflcleanup
1-866-284-4010
glass shade
bulb
motor housing
motor plate
molex
connections
light kit fitter
slot