Craftex CX505, Руководство пользователя

Страница: 9 / 24

9
Figure-5 Securing the sander onto the
stand from inside the cabinet
MOTOR DRUM GUARD
Install the motor drum guard to the dust
hood as shown in figure-6 using screws
provided.
Figure-6 Installing the motor drum guard
FENCE
Slide two T-nuts into the T-slot on the table
and place the fence on the table aligning
the two slots on the fence with the two
holes on the T-nuts. Secure fence to the
table using washers and lock knobs.
Figure-7 Installing the fence
AUXILIARY TABLE
The auxiliary table is installed on the right
side of the sander when sanding round or
curved work-pieces.
To install the auxiliary table:
Move the dust hood out of the way by
loosening the knobs holding it in position.
Move the dust hood to the back and re-
tighten the knob to hold it in position as
shown in figure-8.
Figure-8 Moving the dust hood away
WARNING!
The CX505 is a heavy machine. Do not
over-exert yourself. Get the help of an
assistant when lifting the sanding head
onto the stand.