Craftex CX505, Руководство пользователя

Страница: 15 / 24

15
MAINTENANCE
During the life of your machine, you will
need to practice some regular maintenance
to keep your sander in peak performance
condition.
Check your machine daily for the following
before use:

Damaged or worn sanding belt

Damaged or worn power cord

Loose mounting nuts, bolts, and parts

Any other unsafe condition
CLEANING
The moisture from the wood dust remaining
on the table surface can cause rust. The
table and other unpainted surfaces of the
machine should be cleaned and wiped after
every use to make sure there is no moisture
against bare metal surfaces.
LUBRICATION
Lubricate the belt tension assembly and the
oscillating drum assembly once in 6 months
using a small amount of all purpose grease.
All the bearings in the motor housing and
drums are lubricated and do not require any
lubrication.
WARNING!
Make sure the machine’s power switch is
OFF and the cord is disconnected from
the power source when installing /
removing any part or servicing the
sander.