Craftex CX505, Руководство пользователя

Страница: 11 / 24

11
Proper belt tracking prolongs the belt life,
preventing the belt from slipping off the
drums during operation. The belt tracking is
adjusted by tilting the idler drum slightly
towards the front or rear of the machine.
To check the belt tracking:
Connect the sander to the power source
and turn it ON for 4 to 5 seconds.
Observe carefully where the belt rides on
the drums and turn the machine OFF.
The belt should always be centered on the
drum. If the belt is not centered it needs to
be adjusted.
To perform the belt tracking adjustment:
Make sure the switch is in the OFF position
the cord is disconnected from the power
source.
Remove the work-piece stop and dust
hood.
Loosen the lock nut and turn the adjustment
screw a few turns clockwise or anti-
clockwise as needed using the tool
provided.
Figure-12 Belt tracking adjustment
ON/OFF SWITCH
The ON/OFF switch on CX505 features a
safety key to prevent from accidental or
unauthorized operations. When the sander
is not in use for a long period of time,
simply insert the safety key into the switch.
To start the sander, remove the safety key
and push the ON button in.
Figure-13 ON/OFF switch
IMPORTANT
To prevent any type of accidental
injuries, make sure the power switch is in
the OFF position before connecting the
sander to the power source.