Craftex CX505, Руководство пользователя

Страница: 7 / 24

7
UNPACKING
The machine is properly packaged and
shipped completely in crate for safe
transportation. When unpacking, carefully
inspect the crate and ensure that nothing
has been damaged during transit.
SETUP
The unpainted surfaces of the tables are
coated with a protective coating which
prevents rust. Clean this protective coating
using a rag with kerosene or painter thinner
before starting assembling the machine.
When setting up your machine, you will
want to find an ideal spot where your planer
will most likely be positioned most of the
time. Consider your complete work
environment as well as working comfortable
with the sander before placing your
machine in the ideal spot.
PROPER GROUNDING
Grounding provides a path of least
resistance for electric current to reduce the
risk of electric shock.
CX505 is for use on a normal 110 volt
circuit. Make sure that the machine is
connected to an outlet having the same
configuration as the plug. If an adaptor plug
is used, it must be attached to the metal
screw of the receptacle. To prevent
electrical hazards, have a qualified
electrician ensure that the line is properly
wired.
The sander should be wired with a plug
having 3 prongs to fit a 3 prong grounded
receptacle as shown in figure-1. Do not
remove the grounding prong to fit it into a 2
pronged outlet.
Figure-1 110-Volts outlet for CX505
It is strongly recommended not to use
extension cords with your CX505. Always
try to position your machine close to the
power source so that you do not need to
use extension cords.
In case if you really find it necessary to use
an extension cord, make sure the extension
cord does not exceed 50-feet in length and
the cord is 14-gauge to prevent motor
damage.
WARNING!
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician if you are in doubt as to
whether the outlet is properly grounded.