Craftex CX125, Руководство пользователя, Страница: 4 / 34

4
If you are not familiar with the
operation of a thickness planer, you
should obtain the advice and/or
instruction from a qualified
professional.
Never reach into or through the
throat of the thickness planer. Even
with the power turned off, the cutter-
knives are very sharp.
Keep the cutter head and knives
clean and free of tar and pitch.
Be sure that the motor switch is
properly grounded.
Check each and every board to be
surfaced for loose knots, nails,
screws and any other foreign
materials and defects before
planning.
Keep hands away from the surface
of the wood as it nears the in-feed
rollers.
Make all adjustments with the power
OFF.
Always keep the machine clean and
free of sawdust and wood chips.
They may contain moisture that
could cause the cast-iron surfaces to
rust.
Turn Off the power before removing
any wood shavings and sawdust
from the surface of in-feed & out-
feed tables.
THINK SAFETY. WORK SAFELY
IMPORTANT!
The safety instructions given above cannot be complete because the
environment in every shop is different. Always consider safety first as
it applies to your individual working conditions.
THICKNESS PLANER SPECIFIC
SAFETY INSTRUCTION