
16
HOW TO TEST RUN THE MACHINE
1. Please make sure that you have read
and understand all safety instructions
located at the start of the manual.
2. Make sure that the machine was set up
properly in accordance with the
instruction manual.
3. Clear the area of all tools and objects
used in the assembly stage as well as
any other items that may be in the area.
4. Plug the machine in to the power
source.
5. Turn the main switch on to confirm that
motor is operational and then turn the
machine off. Motor should run smoothly
without any unusual noises or issues.
6. Remove the yellow safety key from the
centre of the main switch.
7. Now that the safety key has been
removed from the main switch try and
start the machine. If the machine does
not start the safety key feature is
working as intended.
NOTE
If the machine starts without the yellow
safety key immediately turn the machine off
as the safety key disabling feature is not
functioning properly. This must be
functioning correctly before using the
machine. Please call customer service for
help at 1.800.461.2879.
GENERAL OPERATION
This is a general overview to help the
beginner machine operator develop a basic
understanding of how the machine is to be
used during operation. This will help make
the controls and components discussed
later in this manual easier to understand.
NOTE
This should only be considered as a
general overview and it is not intended to
be an instructional guide. For more in depth
learning on specific operations please seek
additional training.
To complete a basic operation, the operator
will do the following:
1. Put on all required safety equipment like
safety glasses, ear plugs, and respirator.
2. Check material to make sure that it’s
suitable for planing.
3. If the material is bowed you will have to
surface plane one side of the material
on a jointer to ensure that it rests flat
and solidly on the planer table during
operation.
4. Place your material on the table with
the flattest side down. Place the front
edge of your material far enough
beneath the cutterhead to set the depth
of cut using the cutterhead height scale.
Содержание CX125
