Craftex CX125, Руководство пользователя, Страница: 11 / 34

11
Controls and Components
Figure 2. ON/OFF switch and reset botton
A. Main Switch:
Turns the motor on
when in the up position; turns motor
off when in the down position.
B. Main Switch Safety Key: Disables
switch when yellow key is removed
so the motor is unable to start.
C. Reset Button: Allows the machine
to be restarted in the event the
thermal overload protection has
tripped on the motor. To reset the
button make sure the main switch is
in the off position. Wait 5 minutes to
allow the motor to cool down. Then
you may press the reset button. If
reset button does not stay depressed
the motor will require more time to
allow for cooling. Then try pressing
the resst button again.
Figure 3. Elevation controls and return rollers.
D. Cutterhead Adjustment Crank:
Raises and lowers the cutterhead.
Turn the adjustment crank clockwise
in order to raise the cutterhead or
turn the adjustment crank
counterclockwise in order to lower
the cutterhead.
E. Cutterhead Height Scale: The red
arrow shows the height of the
cutterhead in relation to the table.
The measurement indicated by the
arrow is the thickness of the board
after planing.
F. Return Rollers: Located atop of the
CX125 for assistance in sliding the
workpiece back to the operator.