Craftex CX104, Руководство пользователя, Страница: 7 / 31

7
UNPACKING
The machine is properly packaged in a
carton for safe transportation. When
unpacking, carefully inspect the carton and
ensure that nothing has been damaged
during transit.
While doing the inventory if you can not find
any part, check if the part is already
installed on the machine.
Figure-1 Inventory
LIST OF CONTENTS
A. Band Saw.......................................... 1
B. Legs .................................................. 2
C. Panels ............................................... 2
D. Motor ................................................. 1
E. Motor Pulley ...................................... 1
F. Extension Table ................................ 1
G. Table ................................................. 1
H. Table Lock Pin .................................. 1
I. Table Trunnion .................................. 1
J. Miter Gauge ...................................... 1
K. Dust Port Assembly .......................... 1
L. Table Insert ....................................... 1
M. Table Trunnion Lock Knobs .............. 2
N. Stop Paddle ...................................... 1
O. Table Stop Bolt ................................. 1
P. Rubber Feet for Stand ...................... 4
Q. Hardware Bag (s).............................. 2
SETUP
The unpainted surface of the table is coated
with a rust preventive waxy oil and you will
want to remove this before you begin
assembly. Use a solvent cleaner that will
not damage painted surfaces.
When setting up your machine, you will
want to find an ideal spot where your band
saw will most likely be positioned most of
the time. Consider your complete work
environment before placing your machine in
the ideal spot.
Figure-2 Minimum work space for CX104
WARNING
CX104 is a heavy machine. Do not over-
exert yourself. Use a fork truck or get the
help of an assistant or a friend.