Crafco SUPER SHOT 125, Инструкция по эксплуатации и запасным частям

Страница: 48 / 230

Super Shot 125 Diesel Melter Part Manual
Chapter 5 Operating Instructions
©2017 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-20
5.17 Storing the Machine
Store the machine in an area where moisture cannot enter the heating system such as the heat
transfer oil tank, etc. Extended down time can cause moisture build up in the heating tank.
Evidence that moisture has collected in the heat transfer oil is a constant popping noise. If this
popping noise is heard, warm the heat transfer oil to 300°F (149°C) for two to three hours to
evaporate the moisture. Failure to follow this procedure will cause the heat transfer oil to overflow
the tank resulting in possible machine damage and/or personal injury.
Best practice is to check in the material tank prior to starting the burner. If water is present, try and
remove as much as possible. If the water is not noticed, heat the material to 300°F (149°C) for two
to three hours to evaporate the moisture. Failure to follow this procedure will cause the material to
overflow the tank resulting in possible machine damage and/or personal injury.
Store the machine for longer periods with the material tank empty.