Model 30 Pavement Router Manual
Troubleshooting
Chapter 8
©2018 by Crafco, Inc. All Rights Reserved…………………...………………………………..……………...Troubleshooting 8-2
Table 8-2 Trouble Shooting Guide Model 30 Pavement Router (Continued)
Engine doesn’t spin properly
when cranking.
Starter problems.
•
Repair or replace starter. See
Engine Operators Manual.
Low battery.
•
Charge or replace battery. See
Engine missing or loss of
power.
Dirty carburetor.
•
Clean/Service Carburetor. See
Engine Operators Manual.
Defective fuel pump.
•
Replace fuel pump. See Engine
Operators Manual.
Engage drive system pulling
up on the handle and nothing
happens.
Pulling the wrong handle
•
The drive system is controlled by
the right hand handle.
Drive cable has too much
slack.
•
Adjust the cable so that the drive
system starts to move as you
begin to pull the handle.
Both tires are not at the
correct tire pressure.
•
Make sure both tires are at the
recommended P.S.I. rating.
The Dust Control System is
not controlling the dust as
well as it once did.
Hoses and guards are not
properly positioned.
•
Review the operating procedures
and make sure everything is
properly placed.
Either the dust collection
bag or the large particle
dust collection bin needs
to be cleaned.
•
Clean the dust collection bag
and/or dump out the large particle
dust collection bin.
Old brushes on the cutter
head dust shroud.
•
Replace all the brushes on the
cutter head dust shroud.
