Model 30 Pavement Router Manual
Operating Instructions
Chapter 5
©2018 by Crafco, Inc. All Rights Reserved……………..…………………..……………………..….Operating Instructions 5-2
5.1 Preparing the Machine for Start Up
Step
Action
1
Check engine crankcase oil. Add oil if low. Refer to Engine Operators Manual.
2
Fill engine gas tank with clean, fresh, unleaded gasoline. See “Fuel
Recommendations” in Engine Operators Manual.
3
Check tire inflation. Proper tire inflation is 45 psi. Machine will be difficult to roll with
under-inflated tires.
4
Check engine cooling air intake and external surfaces of engine. Clean if dirty or
obstructed.
5
Check that the air cleaner components and all shrouds, equipment covers, and guards
are in place and securely fastened.
6
Check and/or open the fuel valve on the bottom of the fuel tank so that the engine will
get fuel.
WARNING
The safe operation of this machine is the operator’s responsibility.
Use extreme care when operating this machine; safety is the result of being careful
and paying attention to details.
Always put on protective clothing, long pants, gloves, hard-soled shoes, safety
glasses, dust mask, and ear protection. Tighten all bolts, nuts, and screws every 100
hours.
Table 5-1 Preparing the Machine for Start Up
