©2015 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
93
User Manual
/
AER3100/AER3150
•
Recurring System Log
: The system log is sent periodically. This alert contains all of the system events since
the last recurring alert. It can be scheduled for daily, weekly and monthly reports (
Frequency
). You also
choose the
Time
you want the alert sent.
SMTP Mail Server
Since your router does not have its own email server, to receive alerts you must enable an SMTP server. This is
possible through most email services (Gmail, Yahoo, etc.)
Each SMTP server will have different specifications for setup, so you have to look those up separately. The
following is an example using Gmail:
•
Server Address
: smtp.gmail.com
•
Server Port
: 587 (for TLS, or Transport Layer Security port; the router does not support SSL).
•
Authentication Required
: For Gmail, mark this checkbox.
•
User Name
: Your full email address
•
Password
: Your Gmail password
•
From Address
: Your email address
•
To Address
: Your email address
Once you have filled in the information for the SMTP server, click on the “Verify SMTP Settings” button. You
should receive a test email at your account.
Delivery Options (Advanced)
Email Subject Prefix
: This optional string is prefixed to the alert subject. It can be customized to help you
identify alerts from specific routers.
Retry Attempts
: The number of attempts made to send an alert to the mail server. After the attempts are
exhausted, the alert is discarded.
Retry Delay
: The delay between retry attempts.
SERIAL REDIRECTOR
A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial
device can also be accessed by running “serial” from an SSH session.
Telnet to Serial Configuration
•
Enabled
: Enabling Telnet to Serial will start a Telnet server that
passes its connection to the serial adapter. Enabling this service
is not necessary when accessing serial through SSH.
•
LAN
: Enable serial redirector for LAN connections.
•
Authenticated LAN
: Enable serial redirector for Authenticated
LAN connections. You must be logged into the router to use the
redirector.
•
WAN
: Enable serial redirector for WAN connections.
•
Server Port
: Enter a port number for the redirector to use. (Default: 7218)
