©2015 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
86
User Manual
/
AER3100/AER3150
FEATURE LICENSES
SYSTEM CLOCK
NOTE
: You can restrict remote access to only specified IP
addresses in
SECURITY > Zone Firewall > Remote Access
Restriction
.
Allow Remote SSH Access
– This will enable SSH access
to the router from the Internet. It is only available
when SSH access is enabled in the Local Management
tab. Some carriers block the remote SSH access ports.
If a ping to the router’s WAN port does not work, it is
unlikely that remote SSH access will work.
Some Cradlepoint features may require a license. These
features are disabled by default. To obtain a feature
license, contact your Cradlepoint sales representative.
Once you have obtained the feature license file, upload
the file to enable the feature. A reboot is required after
uploading a feature license file.
Enabling NTP will tell the router to get its system time
from a remote server on the Internet. If you do not
enable NTP then the router time will be based on when
the router firmware was built, which is guaranteed to
be wrong. Whenever the Internet connection is re-
established and once a week thereafter the router will
ask the server for the current time so it can correct
itself.
You then have the option of selecting an NTP server and
adjusting the NTP server port. Select the NTP server
from the dropdown list. Any of the given NTP servers
will be sufficient unless, for example, you need to
synchronize your router’s time with other devices in a
network.
•
Time Zone
– Select from a dropdown list. Setting your Time Zone is required to properly show time in your
router log.
•
Daylight Savings Time
– Select this checkbox if your location observes daylight saving time.
LOCAL MANAGEMENT
•
Enable Internet Bounce Pages
– Bounce pages show up in your web browser when the router is not
connected to the Internet. They inform you that you are not connected and try to explain why. If you
