COVANA OASIS, Руководство по установке

Страница: 30 / 62

30 INSTALLATION INSTALLATION MANUAL
4) While holding the outer shell open, cut and
remove the two cable ties that hold the wire
guard. (Figure 61 and Figure 62)
WARNING

Completely remove the cable ties, as they could
interfere with the CTS-70 mechanism.
5) Open the wire guard by ripping the plastic off.
There will be a plastic bag with two bottles of
primer inside and an alcohol swab; put those
items in a safe place.
6) Gently place the wire guard outside of the inner
shell. Let the wire guard hang down for the next
steps.
WARNING

Ensure the wire is clear of the inner and outer
shells before proceeding. The wire should only
hang from the inner shell hole. (Figure 62)
Wire
Guard
CTS-70
(Continuous Tension System)
Cable ties
Inner shell hole
Figure 61
Figure 62