COVANA OASIS, Руководство по установке

Страница: 18 / 62

18 INSTALLATION INSTALLATION MANUAL
4) Remove the parts box, the foam pieces and the
seal from the crate. Temporarily put these items
in a safe place. (Figure 26)
5) Use scissors or a utility knife to cut the four
cable ties holding the sleeve boxes (2 boxes per
side) and discard the cable ties. (Figure 27)
CAUTION

When using the utility knife or scissors, be careful
not to puncture the cardboard box.
6) Remove the four sleeve boxes from the crate
and place them in a safe place. (Figure 27)
7) Use a slotted screwdriver to remove the two
slotted #10-24 x 3/8
″ screws holding the
operator in place. (Figure 28)
8) Bend the metal strapping all the way back and
reinstall the screws on the operator. (Figure 28)
9) Use the
3/8″ (10 mm) socket wrench to unscrew
the hexagonal 1/4
″-14 x 2″ lag bolts on the
bottom of both jacks. There are two lag bolts per
side. (Figure 29)
Figure 26
Seal
Foam
pieces
Part box
Figure 27
Figure 28
Figure 29