COVANA OASIS COVER, Руководство пользователя, Страница: 56 / 82

page-
54
OASIS COVER
FIGURE 83: OPERATOR COVER REMOVAL
3. Use ½ in. (13 mm) hexagonal socket wrench
to raise or lower the spa cover by turning the
operator extension shaft see
Figure 84 .
4. Slowly turn the extension shaft. Stop
immediately if some tension occurs.
FIGURE 84: OPERATOR EXTENSION SHAFT
WARNING
Never use a power tool, as this will damage the
unit.
5. Turn the extension shaft clockwise to lower
the cover and counterclockwise to raise the
cover.
WARNING
Do not exceed the limits of the mechanism. Failure
to respect this guideline may cause mechanical
failure.
6. Reinstall the operator cover with the four
screws.
7. Reconnect and turn on the power supply.
WIRE GUARD REASSEMBLY
You might need to reassemble your wire guard
harness if the magnetic plate (
Figure 85 ) came off to
let the wire out.
l
The function of the wire guard is to protect the wire
from excessive strain. The main causes for the
magnetic plate to come off are the wire getting
caught, ice buildup around the roof or someone
catching or pulling on the wire.
l
We recommend following the steps below for
properly reassembling the wire guard.
FIGURE 85: MAGNETIC PLATE AND WIRE GUARD
WARNING
Failure to follow these guidelines could impede
designed performance or could cause mechanical
failure.
241146 OWNER'S MANUAL REVISION 1