COVANA C-HOR, Инструкция по эксплуатации

Страница: 52 / 60

52 INSTALLATION MANUAL
The cover lowers, but
does not rise.

The cam plate is
missing.

The key switch is
faulty.

Limit switches are
stuck.

Only a certified electrician can open the
operator and check for faulty up and down
limit switches.

Verify whether there is any corrosion on the
terminals. If yes, clean the terminals.

Open the key switch terminal and check for
faulty switches.

Verify if any wires are cut/pinched.
The contour seal
seems contaminated.

The seal has
accumulated mold.

Clean the affected areas with bleach and a
soft brush.
Cover no longer tilts 
Brass shear pin in tilt
mechanism is broken.

Gas spring is weak.

Too much snow/ice on
cover.

Replace shear pin as per instructions.

Remove snow/ice.

If all previous attempts failed, contact your
local dealer.
Cover tilts but will not
return to flat position
when lowering

Gas spring is faulty

Pivot mechanism is
jammed

Replace pivot assembly gas springs.

If possible, manually pivot the cover to
vertical position by pulling down on front of
cover while lowering
– no more than 50 lbs

Call your local dealer