PAGE 5 OF 7
S
tep
9:
Attach the fuel supply hose (#12) to the tank by
rotating clockwise to its connector. See Figure 9.
S
tep
8:
Open the front door (#5), place the tank into the tank
support assembly (#7) and through the tank fastener
(#8). See Figure 8.
Caution:
Tank must
face this way.
FIGURE 9
7
8
5
FIGURE 8
Step 7:
Place the tiles (#11) on to the table top (#6).
See Figure 7.
Note:
The igniter valve should be facing the front left side
of the fire pit.
Note:
If any EVA foams on the table top (#6) are missing, there
are extra EVA foams in the hardware kit. See Illustration B.
Step 6:
Place the table top (#6) on to the frame assembly.
Fasten them together by using bolts (#15) and
washers (#17). Completely tighten all of the bolts
and cover them with bolt caps (#22). See Figure 6.
6
11
FIGURE 7
2
5
Igniter
Valve
3
6
17
15
22
FIGURE 6
14
#15 BOLT M6*14
B
rotate
clockwise
12