#15 BOLT M6*14
5
2
3
5
10
17
15
22
5
10
FIGURE 5
Note:
1) Please close the front door to
ensure proper assembly.
See Illustration A.
2) When moving the fire pit, please
ensure that the front door is
closed.
PAGE 4 OF 7
S
tep
5:
Insert the upper connector (#10) marked “F”, into the
top holes of the front door (#5). Fasten the upper
connector (#10) to the left frame (#3) by using bolt
(#15) and washer (#17). See Figure 5.
Note:
The lower connector (#9) is marked with an “E”.
#15 BOLT M6*14
2
3
9
5
5
3
E
9
17
15
22
3
2
FIGURE 4
S
tep
4:
Fasten the lower connector (#9) to the corner of the
bottom rim of the left frame (#3) by using bolt (#15)
and washer (#17). Then, insert the front door (#5) in
to the connector tab of the lower connector (#9).
See Figure 4.
Note:
The wheels attached on the tank support assembly (#7)
should be facing towards the outside.
S
tep
3:
Fasten the tank support assembly (#7) to the front door
(#5) by using bolts (#15) and washers (#17). Insert the
tank fastener (#8) in to the tabs on the front door (#5)
and fasten them together by using washers (#17) and
nuts (#20). See Figure 3.
S
tep
2:
Insert both ends of the cross brace (#4) into the bottom
grooves of the right and left frames (#2 and #3) from top
to bottom. Fasten them together by using bolts (#15)
and washers (#17). Completely tighten all of the bolts.
See Figure 2.
#15 BOLT M6*14
7
22
22
17
15
15
17
7
8
5
20
17
The tab
8
FIGURE 3
22
15
17
3
4
3
4
2
1
FIGURE 2
14
14
14
14
#15 BOLT M6*14
Note:
The labeled arrow marks on the cross brace (#4) should
coincide with Figure 2 to ensure proper assembly.