FIGURE 10
FIGURE 12
burner system
hose
Note:
When closing the door,
ensure that the distance
between the hose and
the burner system is
more than 2 inches.
FIGURE 11
Step 10:
Attach the other end of the fuel supply hose (#12) to
the igniter valve. See Fig 10-1, Fig 10-2, Fig 10-3, and
Fig 10-4.
Fig 10-1
Fig 10-2
Fig 10-3
Fig 10-4
fire shield
Note:
The fire shield on the
burner system must be
exposed.
Note:
The lava rocks can not be
exposed over top of the
steel cover surface.
Step 11:
Place the lava rocks (#25) into the steel cover.
See Figure 11.
Step 12:
Fasten the handle (#16) to the cover (#13) by using
washers (#18 and #19) and nut (#21). Place the
assembled cover (#13) on to the table top (#6) to
cover the lava rock set. See Figure 12.
Note:
In order to protect the burner system, when
the fire is not in use and on rainy days, the
cover should be used to protect the fire bowl.
PAGE 6 OF 7
6
13
16
18
18
19
21
SPECIFIC WARNINGS:
1) Both children and adults should be aware of the hazards of high surface temperatures and should keep their
distance in order to avoid burns and ignition of clothing.
2) Children should be under adult supervision when in the vicinity of this appliance.
3) Clothing or any other flammable materials should not be hung from or near this appliance.
4) Any guard or protective device removed for servicing the appliance must be replaced prior to use.
5) Installation and repair should be done by a qualified person. The appliance should be inspected before use
and at least annually by a qualified service technician. Frequent cleaning may be required. It is imperative that
the control compartment, burners, and circulating air passageways of the appliance be kept clean at all times.
25
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
