Coto baby Lunaro, Инструкция по эксплуатации

Страница: 18 / 52

SAFETY AND COMFORT
LUNARO
GB
11
FASTENING THE CHILD INTO THE CHILD SEAT
1. The correct adjustment of the headrest ensures that the child is properly fastened
into the car seat. The headrest must be adjusted so that the harness(which moves
with the headrest) is at shoulder height on the child or slightly above, but never
behind the back or at the ear level. (fig. 13)
2. Pull the headrest height adjuster and move headrest to shoulder height in
accordance with the size of the child. (fig. 14)
3. Loosen the harness strap by stretching the chest section while holding down
the center adjuster. (fig. 15).
4. Open the buckle so that the child can be placed into the seat. The harness straps
can be placed on the armrest. (fig. 16).
5. Place the child into the seat, then fit the safety harness around the child, using the
buckle to fasten the two parts together until you hear a “click”. (fig. 17)
6. Stretch the harness adjustment belt in order to give the harness correct amount of
tension. (fig. 18,19)
ADJUSTING THE SEAT
In order to make the child as comfortable as possible, the seat can be reclined by
pulling the lever under the front part of the seat. (fig. 20)
Keep the lever pressed down as you recline the seat, releasing it when the seat is
in the desired position. (fig. 21)
CHILD SEAT CARE AND MAINTENANCE
REMOVE THE COVER FOR CLEANING
The car seat cover is removable and washable. In case of light staining, clean using
a damp cloth or soapy water. Refer to the care label attached to the fabric cover.
REMOVE THE COVER
1. Open the Velcro fasteners on headrest where the shoulder belts go through,
then pull away the cover from the headrest. (fig. 22)
2. Unhook 8 elastic hoops at the sides edge of the shell, pull cover up and
onto the seat surface.
TO REFIT THE COVER, SIMPLY REVERSE THE PROCESS, HOWEVER ENSURE THE
HARNESS AND BUCKLE ARE THE CORRECT WAY ROUND AND NOT TWISTED.
(fig. 23)
LUNARO